SOUNDCARD – INTERFACE
MICROHAM
More than
just a soundcard interface - Digi Keyer

The Digi Keyer is much more than an
interface, because it is an own, self contained soundcard. Together with the
other integrated components like CAT interface and PTT/FSK/CW keyer this is a very versatile interface for all special
modes. Use RTTY, Fax, SSTV, Echolink, PSK31, MFSK,
Olivia, WSJT, APRS and many more, everything which is supported by a soundcard.
With the
integration of a high-quality soundcard you have several advantages:
Of course
all connections between radio and PC are electrically isolated to avoid noise
loops. Between the Digi Keyer
interface and the PC just a standard USB cable is required. And also from
interface to the radio it's only one cable, which usally
connects to the rear connections of the radio. This
greatly simplifies station setup.
![]()
The
integrated CAT interface transmits frequency nad other information between PC and radio, most
manufacturers are supported: Icom, Kenwood, Yaesu, Elecraft, JRC, and TenTec. Depending on type a level conversion is done by the
interface.

With just
one cable between Digi Keyer
and radio all connections for CW, PTT and FSK keying are done. Further the
interface offers two more time delayed PTT lines for power amplifier and
pre-amp keying.
A remote
connection on the rear side of the Digi Keyer is used for a PS/2 keyboard (full or 10 Keypad, see
below). With this keyboard pre-defined text can be recalled for digital modes
like RTTY.
The cable
between Digi keyer and
radio is individual to each radio model and must be ordered separately. We
offer cables for most radio models. If the interface will be used on several
radios, just order one cable for each radio.
Weight
0.55kg, Size 175x85x44mm.
DIGIKEYER 2195,00 KR
KABEL TIL RADIO - SPECIFICERS VED BESTILLING 495,00 KR
![]()
USB MODEM DER KAN
KLARE ALLE MODES
1295,00 KR - KABEL TIL TRANSCEIVER 185,00 KR
![]()